Close-out sale on Speich BH500 - BH1200 wiper blades! 35% off until they're gone!
Signed in as:
filler@godaddy.com
Reversed fixed light frames can be made from the following materials:
• Cast Aluminum - Alloy 319 for 10” - 12”; Alloy 356 for 14” - 18”
• Cast Brass - Alloy 115 for 4” - 12”; Alloy 8440 for 14” - 18”
• Make sure to specify spigot length when ordering. Spigot length available: 0” - 1”. Spigot protrudes through bulkhead plate to flush out with opposite side of bulkhead. Longer spigot lengths are not available.
Standard sizes:
• 10”, 12”, 14”, 16”, 18” clear glass area diameter
• 8” diameter reversed fixed lights will be available as of January 1, 2016.
Deadlight cover specifications:
• Standard cover is made from cast aluminum
• Covers made from A36 mild steel, or 304 stainless steel available at an additional cost
• 12”, 14”, and 18” diameter reversed fixed lights are available without a cover
• Holdback hooks and chain are available to secure deadlight cover in open position
Glass specifications:
• 3/4” thick for 8” - 18” diameter clear glass area
• All glass is clear tempered plate
• 1/4” thick wire impregnated glass is the same price as clear tempered glass
• Frosted glass is available upon request for an additional cost
Bolting specifications:
• 8 holes are standard for 8” and 10” diameter reversed fixed lights
• 12 holes are standard for 12”, 14”, 16”, and 18” diameter reversed fixed lights
• When purchasing a new reversed fixed light to replace an older existing reversed fixed light, the frames can be shipped undrilled for customer to match existing bolt holes.
Gaskets:
• 1/8” thick flat neoprene gasket (between glass and frame)
• 5/16” x 3/8” x 5/16” extruded neoprene gasket for deadlight cover
Bell nut and screw assemblies:
• Used to secure deadlight cover in closed position
• 10” and 12” diameter reversed fixed lights use 5/8” dia. x 3” long screw
• 14” - 18” diameter reversed fixed lights use 3/4” dia. x 3” long screw
ABS Type Approval / Classing Agency Approval:
• All fixed lights are built to standards generally accepted by ABS, USCG, and other classing agencies.
• Fixed lights do NOT carry ABS “Type” approval. For further explanation, click here.
• Drawings and release letters are available for submission for classing agency review.
• It is the responsibility of the customer to verify which certification requirements (i.e. ABS, USCG, DNV, SOLAS) apply to their vessel, and to check with their local governing agency as to the requirements for certifications for all of the items quoted, based on the use for each item on the vessel, and the location of each item as installed on the vessel. Depending on the requirements of the governing agency, additional testing at the manufacturing plant may be required. A separate fee will be charged for any testing.
• Fixed lights conform to C-class fire rating - they are made of non-combustible materials, however, they are NOT designed or certified to resist the passage of fire from one space to another.
Copyright © 2020 Marine & Construction Supplies - All Rights Reserved.
We are wholesale distributors and do not maintain a retail space. Any in-person consultations are by appointment only.